How to charge

A step-by-step guide on how to start and stop charging for electric vehicles at CLP's EV charging station.

Start charging

1. Once you park your electric vehicle (EV) at its dedicated parking bay, connect the charging cable into your EV’s charging inlet and charger socket.

2. Select the connected parking number in charging kiosk.

3. Review and accept terms and conditions.

4. Select your charging duration and press ‘Confirm’. 

5. Tap your Octopus card on the reader to start charging.

6. Estimated time left will be displayed in the kiosk once charging starts.

Stop charging

7. Tap the same Octopus card to view charging status.

8. Press ‘Stop’ if you need to stop charging service.

9. Press ‘Yes’ to confirm stop charging service.

10. You can unplug the charging cable from charging socket.

  • Push the charging cable lightly and disconnect the charging cable again, if the charging cable cannot disconnect from the charger socket.
  • Depending on the vehicle model, users may need to use vehicle side control switch to unlock the power connector before disconnection.
Note:

The images above are for reference only.

More information

Please refer to our Semi-quick Charge User Guide (PDF) for important notes and terms and conditions.

Start charging

1. Plug the power connector into the charging socket of your electric vehicle.

2. Select the connected parking number in charging kiosk.

3. Review and accept terms and conditions.

4. Select your charging duration and press ‘Confirm’. 

5. Tap your Octopus card on the reader to start charging.

6. Estimated time left will be displayed in the kiosk once charging starts.

Stop charging

7. Tap the same Octopus card to view charging status.

8. Press ‘Stop’ if you need to stop charging service.

9. Press ‘Yes’ to confirm stop charging service.

10. Unplug the power connector and put it back to the holder carefully to avoid damaging the device.

  • Depending on the vehicle model, users may need to use vehicle side control switch to unlock the power connector before disconnection.
Note:

The images above are for reference only.

More information

Please refer to our Quick Charge User Guide (PDF) for important notes and terms and conditions.

Back to top